Our cambers work for all the of cambered competition sails, foil, slalom and speed.

Foil sails: it allows for a stiffer profile whilst it still rotates. Foil sails need a very clean airflow to make a difference to the rest of the field, these little improvements makes the difference. 

Slalom sails: it's the weight reduction on the big sails (>7.5m2) where the benefits are the biggest, the momentum on rotation is reduced, which allows the sails respond quicker. These works even better if carbon sail battens are used. On the smaller sizes it allows you to play with a differ from section of the sail, to get a clean stiff leading edge, and still with a smooth rotation.

Speedsails under load deform a lot, so with a carbon camber you can step up with higher camber pressure.

See camber size section if our cambers fits your sail.

Like a normal camber, you need to inspect if the camber is functioning correct.

Worn parts can be replaced, as we have replacement sets available for shafts and rollers.

In case of a breakage, you can sent the camber to use for further inspection. We have a crash replacement program.

Clean and rinse with freshwater when used in salt water.

We produce a several standaard lengths which fits most sails.

Common know sizes in the industry and our equivalent model:

XL = 130

L = 100

S = 70

Tekcam = 65 / 68

Any questions on sizing, just ask as we can adjust to different sizes to.

How to measure a camber?
just measure from the center of the roller (which are 99% 10mm in diameter) to the part where the batten enters the Camber. The use the metric system in mm to measure our products.

The following brands our cambers don't fit:
Niel Pryde, as they tend to use a rope to get the camber tensioned.

DuoTone, the unique design of DT which is a small camber doesn't allow our standard size camber to fit.

We tend to have minimum stock as we build to order.